CCTV  Camera Manufacturer

CCTV Camera Manufacturer

进入中文版 ENGLISH
Products Category
Contact Us

Name: Jenny Cao
Tel: +86-755- 89600025
Fax: +86-755-89600391
Mobile: +86-13802558051
E-mail: info@cctv-camera.cc
Add: 5th Floor, Plaza B, YiYuanTong Industrial Park, ZhongHao Er Lu, Xuexiang, Bantian, Shenzhen China 518129
MSN: Whatsapp/Wechat: +8613802558051
Skype: cctvexport
QQ: 235664519, 800008758
Alitalk ID: cncctvcamera

Car Number Plate Recognition Camera

Car Number Plate Recognition Camera
Product name : Car Number Plate Recognition Camera Item : TT-CPHZ70EVI
CAR NUMBER PLATE RECOGNITION CAMERA
Model No.: TT-CPHZ70EVI
 
 
Ø Instruction
The camera adopts 1/3”SONY CCD sensor and DSP (digital signal processing) technology, with high-resolution and high sensitivity; The intensity of auxiliary lights and glare inhibition (Halo shrinkage can be controlled by the key control. The intensity of auxiliary light is continuously adjustable; Five modes for choice, easy for testing and setting. Use special auxiliary lights, can capture clear and color image of car plate camera at night.
   It applies to toll station, mount, entrances and exits of parking, traffic lights, and other monitoring sites. This can effectively capture license plates of passing cars and license plates of vehicles traveling on the mad and vehicle identification.
 
Ø Please use it clean ,dry, little dust environment to lengthen lifespan.
Don’t use it environment that temperature >50℃. Handle with care.
 
Ø Features:
1.         Color 1/3 Sony EFFIO-E CCD DSP, 700TVL, 0.01lux (4140+673)
2.         90pcs White LEDs, IR Distance: 35m
3.         Intelligent Control LEDs
4.         8-20mm Mega Pixle Varifocal Zoom Lens
5.         Built-in Fan
6.         With Standard Bracket
7.         Size: 390 (heart) x 110 (W) x 140 (heart) mm
 
Ø Specification:
Image Sensor Device
1/3 SONY HAD CCD
Effective Pixels
792(H) ×582(V)
System of Signal
PAL
Horizontal Resolution
700 Line (color)
Minimum Rumination
0.01 Flux at F1.2(color)
Automatic iris dire
F=8-20 auto IRIS lens
IR LEDs
90pcs White LEDs
IR Distance
35m
Waterproof Rate
IP66
S/N ration
More than 48dB
Electronic shutter
1/50-1/10.000/sec
Electronic shutter control
On/Off Switchable
Backlight Compensation
On/Off Switchable
Auto gain control
On/Off Switchable
Color
Color(if illumination <1 Lux, auxiliary power on automatically)
Auxiliary lights available distance
1m—3m
Video output
1.0Vp-p,75Ω
Power supply
DC 12A 2V
Operating temperature
-10℃—50℃
Weight
About 2500g
Dimension
390 (heart) x 110 (W) x 140 (heart) mm
 
 
Ø Installation
1.      Connection between computer and license plate recognition camera cable.
2.      Connect to DC 12V power supply; if the upper casing is open, the indicator light is on. (D4).
3.      When the image appears in the monitor, adjust the focuses and Iris to get clear image.
4.      Cover the upper casing, lock the back screw.
5.      Fix the screw arbor of bracket well with holes at the bottom of camera.
 
Ø Camera control and setting
1. This camera is working at five different modes. Select different working mode by the key DOWN or through RS485. (not standard equipment)
 Five modes as below:
 a. Mode 1: 120km/hour                     b. Mode 2: 80km/hour
 c. Mode 3: 40km/hour                      d: Mode 4: Standard mode
 e. Mode 5: Glare inhibition mode
At a ,b, c mode, glare inhibition and electronic shutter at the same time working, glare inhibition intensity is adjustable, and glare inhibition auto switch(at night glare inhibition works, at day time, auto switches to normal working mode)
At mode d, there is no electronic shutter and glare inhibition function.
At mode e, there is no electronic shutter, only work at glare inhibition mode, glare inhibition intensity is adjustable and glare inhibition function auto switches. ADD+ is strengthen and DEC- is weaken.
2. When auxiliary lights are too weak, operate LED-VR to adjust auxiliary lights brightness.
3. Glare inhibition adjustment measures:
 a. only when auxiliary lights on , to adjust intensity of glare inhibition.
 b. ADD+ is to strengthen glare inhibition, DEC is to weaken the glare inhibition.
 c. Press ADD+ and DEC- at the same time is to resume to factory default.
 
Ø If there is any problem in the camera, please try to solve it as below. If not, contact us.
Trouble
Solution
No video output
Check the power supply and power wire, video wire, check if the auto Iris is suitatable.
Image is dark
Check the working mode and intensity of glare inhibition.
Image is obscure
Check the lens surface and focus if it is well focusing well.
Image whitish
Adjust DC-LEVEL drive output level.
Image flashing
Adjust DC-LEVEL output.
 
Ø Warning
 In order to reduce the risk of electricity shock, don’t open the cabinet.
←[Previous : TT-MDMD85C] [Next : TT-QWSO60CO-Z4]→
Send Inquiry :
Your name:
Your E-mail: *
Message: *
Enter your inquiry details such as product name, color, size, MOQ, FOB, etc.
Code: *
 
Related Products :
TT-6ISO70E
600TVL Weatherproof IR Camera with WDR
TT-50SO60CO
600TVL Weatherproof IR Camera with WDR
TT-LSO70E-Z2
80-100M Array LED Outdoor IR Camera
TT-1HSO70E
80-100M Array LED Outdoor IR Camera
TT-9HSO60CO
30-40m Varifocal Outdoor IR Camera
TT-WNSO70EVI
30-40m Varifocal Outdoor IR Camera
40-50 Meter Outdoor IR Camera
TT-70SO70E
40-50 Meter Outdoor IR Camera
480TVL Varifocal IR Camera with WDR
TT-80SO48OVI
480TVL Varifocal IR Camera with WDR

×

Skype: cctvexport MSN: Whatsapp/Wechat: +8613802558051 QQ: 235664519 QQ: 800008758 Alibaba.com ID:cncctvcamera